Resources
This library is built for procurement and engineering alignment, not general marketing reading. Each article includes decision criteria, risk controls, and practical actions you can reuse in real RFQ and validation workflows.
Read articles in decision order so your team moves from model screening to RFQ quality and then to customization governance without missing critical handoff details.
| Project Stage | Recommended Article | Decision Output |
|---|---|---|
| engineering | Air Gap Tolerancing and Dynamic Deflection in AFPM Motors: Thermal Stack, Housing Stiffness, and Factory Shimming Protocols | Reusable acceptance criteria and checklists for supplier communication. |
| engineering | Stator Potting Resins for Yokeless AFPM Motors: Thermal Conductivity, Glass Transition (Tg), and Shear Torque Integrity | Reusable acceptance criteria and checklists for supplier communication. |
| engineering | Rotor Position Sensor Selection for Axial Flux Motors: Hollow-Shaft Resolvers, Inductive Rings, and Magnetic Encoders under High Pole Counts and Axial Runout | Reusable acceptance criteria and checklists for supplier communication. |
You can also filter by buyer intent in our product, company, and news categories.
Review AFPM motor air gap tolerancing, thermal stack and rotor deflection with a worked clearance budget, factory shimming workflow and supplier RFQ checklist.
Compare stator potting resins for yokeless AFPM motors by thermal conductivity, Tg, adhesion, and process risk. Use the RFQ checklist to plan validation.
Compare rotor position sensors for axial flux motors: resolvers, inductive rings, and magnetic encoders. Define error and runout budgets, then plan your OEM RFQ.
Compare high-speed axial flux rotor magnet retention, carbon fiber sleeves, hoop stress and thermal fit. Use the RFQ checklist to define qualification evidence.
Compare direct oil cooling in axial flux motors, fluid compatibility, churning losses and stator potting. Use the RFQ checklist to request supplier evidence.
AFPM motor bearing selection: compare axial loads, thermal preload drift and L10h fatigue life. Use the RFQ checklist to request an engineering review.